The BACKSPACE or DELETE key may be used to edit the
command line. Commands and keywords are not case-sensitive.
The Management Port IP address is a compulsory parameter, and
must be specified by you. All the other parameters (except default
gateway) are defaulted to pre-defined values if they are not
specified.
2.1.1.3
Configure Community-handler
2.1.1.4
OMS 870
The following example shows how to set community for a default
user. If setting community for a specific user, the corresponding IP
address must be entered instead of 0.0.0.0
1. CLI>com
2. Press Enter.
3. CLI>Community-handler\ ?
4. Press Enter.
*** current menu path:
<root>
*** valid commands:
Add:
Edit:
Remove: Remove Community entry
Show:
Running-Config:
Exit:
CLI>Community-handler\
1/1531-CRA 119 0513/30 Uen A 2007-11-15
Community-Handler
Add Community entry
Edit Community entry
Show Community entry
Marconi OMS 870 R3.0 Quick Reference Guide
2-35