Led Indicator; Installation - Cisco SCH-7IN-TS-B/W Reference Manual

LED Indicator

Figure 6
1
2
LED Indicator
The LED on the touchscreen indicates the camera status of the camera and booting information as
described in the next table.
Table 2
LED Color
Off
Green
Green (blinks slow)
Green (blinks rapidly)

Installation

WARNING! Before installing the touchscreen, switch off the circuit breaker or remove the fuse from
Warning
the fuse box.
AVERTISSEMENT! Pour l'endroit où vous installez l'écran tactile, coupez le disjoncteur ou enlevez le
fusible de la boîte de fusible.
IMPORTANT! Before you can complete the instructions below, you must have a Back Box installed
Note
according to the documentation provided in the Back Box kit. See the
page 4
Cisco Smart+Connected 7" In-wall Display Reference Guide
8
Touchscreen Placement
New Device
AC Power (unless using PoE)
LED Indicators
Touchscreen Status
Camera is Off
Camera is On
Booting
Restoring (during a factory restore)
for details.
"Back Box Options" section on
OL-27263-01