Regulatory/Safety Information; Related Documentation - Cisco SCH-7IN-TS-B/W Reference Manual

Table 3
Operating temperature
Storage temperature
Buttons and Outputs
Reset
Dimensions
W x H x D
Mounting

Regulatory/Safety Information

To review regulatory information, go to

Related Documentation

For more information about the Cisco Smart+Connected Residential products, see the following
documents and websites:
Subject / Document Title
General
Product Information and Home Page
Cisco 1-Year Limited Hardware Warranty Terms
Regulatory Compliance and Safety Information for Cisco Smart+Connected
Residential Products
Cisco Support
Technical Documentaion
OL-27263-01
Cisco In-wall Display Specifications (continued)
32°F to 104°F (0°C to 40°C)
Relative humidity: 95%
–4°F to 149°F
(–20°C to 65°C)
Reset: Run a magnet from left to right along bottom of panel
Restore Factory Defaults: Remove panel from wall, toggle the
two-position switch behind the panel, remount panel on the wall.
will reset the display to default settings and may require the device to
be updated in the project.
4 7/8" x 1 1/8" x 7 1/4"
(124mm x 29mm x 184mm)
In-wall
www.cisco.com/go/smartconnectedresidential/docs.
Location
www.cisco.com/go/smartconnectedresidential
www.cisco.com/go/smartconnectedresidential
warranty
www.cisco.com/go/smartconnectedresidential/
docs
www.cisco.com/cisco/web/support/
Cisco Smart+Connected 7" In-wall Display Reference Guide
Regulatory/Safety Information
This
21