Overview - Cisco SCH-7IN-TS-B/W Reference Manual

Smart+connected 7" in-wall display
Table of Contents

Advertisement

Overview

Overview
The Cisco Smart+Connected 7" In-wall Display is a stylish way to offer total control where the resident
needs it most, such as next to the front door, in the kitchen, or in the living room. Since the Cisco In-wall
Display supports both Ethernet and Wi-Fi connectivity, it can be securely mounted in any area of the
residence to provide consistent and reliable network access. The Cisco In-wall Display also supports
Power over Ethernet (PoE), allowing the device to receive power directly from the Ethernet cable,
eliminating the need for a separate power connection. Residents can also use the built-in camera to view
video from a Cisco Video Door Station or from the lobby (note that the Cisco Video Door Station is a
separate product that must be purchased separately.) Features include:
Figure 1
The available network and power options are:
Cisco Smart+Connected 7" In-wall Display Reference Guide
2
Integrated camera with full-motion video for high-quality audio and video communications with the
Cisco Smart+Connected Video Door Station and Cisco Portable Tablet.
Audio and video intercom integration with other Cisco In-wall Displays and Cisco Portable Tablets
installed in the residence.
Sleek look and feel with edge-to-edge capacitive glass and low-profile.
Four customizable buttons allow one touch to set a scene (for example, a sleep scene could turn off
the lights, reduce the temperature, and lock the doors).
G.722 wideband audio intercom featuring beamforming microphones for crystal-clear
communications.
Flexible power (AC or Power over Ethernet) and network connectivity (Ethernet or Wi-Fi) options.
Cisco In-wall Display
Option 1: Ethernet with PoE—The Ethernet network connection is provided through the PoE
Injector. No additional wiring is needed.
Option 2: Ethernet with AC—Connect the touchscreen to one of the RJ-45 LAN ports on the
gateway/router using the RJ-45 Ethernet cable.
Option 3: Wi-Fi with AC—The internal Wi-Fi will communicate with the LAN's WAP. If the LAN
has a WAP set up, no additional wiring is needed.
OL-27263-01

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents