Cisco SCH-7IN-TS-B/W Reference Manual page 14

Power Installation
Figure 11
1 Ethernet Connection
2
Power Box
3
Back Box
Secure the power box into the Back Box using the screws provided.
Step 6
Note
Align and slide the back of the touchscreen into the power box. The touchscreen is magnetic and should
Step 7
snap into place easily.
(Optional) To secure the touchscreen inside the power box, remove the tape covering the bottom security
Step 8
pin before attaching the touchscreen to the power box.
Cisco Smart+Connected 7" In-wall Display Reference Guide
14
Ethernet Connection
Overtightening the power box screws could result in a poor connection between the
touchscreen and the power box and could also cause the touchscreen to warp.
OL-27263-01