Cisco SCH-7IN-TS-B/W Reference Manual page 17

Using a small unbent paper clip, insert the paper clip straight up and into the small hole (about 1/4") or
Step 2
as far as you can. There's another small hole inside the touchscreen which the paper clip needs to insert
into also (see
second small hole.
Figure 13
1 Insert the paper clip through this slot
2
Continue to insert the paper clip through the small hole
3 Bottom of the touchscreen
OL-27263-01
Figure 13 through Figure 15). You may need to wiggle the paper clip a bit to get it into the
Locate the Touchscreen Hole
Cisco Smart+Connected 7" In-wall Display Reference Guide
Restore to Factory Default
17