Fanimation Subtle Owner's Manual page 13

How to Assemble Your Light Kit Assembly or Cap (continued)
3A. (Option A--for use with light kit)
Connect the 2 single pin connectors from the LED
assembly to the 2 single pin connectors from motor
assembly. (Figure 3A)
CAUTION
To reduce the risk of electric shock, disconnect the
electrical supply circult to the fan before installing
light kit.
NOTE: If you have installed your fan with the steel
cap, skip Steps 4 and 5.
4. Assemble the LED assembly to the light plate
assembly using the two key slots. Replace the
removed screw in Step 2 and secure all three screws.
(Figure 4)
CAUTION
The light source is designed for this specific
application and can overheat if serviced by untrained
personnel. If any servicing is required, the product
should be returned to an authorized service facility
for examination or repair.
5. Assemble the glass to the light plate assembly
by twisting in a clockwise direction. Do not overtighten.
(Figure 5)
LED
Assembly
Figure 3A
LED
Assembly
Light Plate
Assembly
13
Steel Cap
Figure 3B
Light Plate
Assembly
Figure 4
Figure 5
Glass