2
Studio One
2.5
Automation Controls
2.4.1
F1-F4 Functions
2.5
Automation Controls
Control Link
2.6
Using Shift plus the lower four Session Navigator button will access alternate
functions for your FaderPort. By default, these are assigned as follows:
F1. Open Inspector
•
F2. Open Editor
•
F3. Open Mixer
•
F4. Open Browser
•
Power User Tip: The default assignments for the Function buttons can be customized
using the FaderPort device editor. See Section 2.6 for more information.
1
1. Touch / Latch. Engages Touch Automation on the currently
selected track. Press the SHIFT and Touch buttons simultaneously
to engage Latch Automation on the currently selected track.
2. Write / Trim. Engages Write Automation on the currently selected track. At
the time of publication, Trim Automation is not available in Studio One.
3. Read / Off. Engages Read Automation on the currently selected track. Press
the SHIFT and Read buttons simultaneously to undo the last action.
Click on the pull-down menu in the Control Link display
to launch the FaderPort editor window.
Right-click on any FaderPort control and select "Assign
Command" to customize your FaderPort.
FaderPort™ Multichannel Production Controllers
2
3
Owner's Manual
9