DeVilbiss PulseDose PD1000I Instruction Manual page 7

Threaded Cylinder Connections (Model PD1000G)
1
Align and start the threads on
the conserving device with the
threads on the oxygen
cylinder.
Using Your PulseDose Compact Conserving Device
1
Open the cylinder.
4
Breathe normally, the
conserving device will deliver
a bolus of oxygen at the
leading edge of inspiration on
every breath up to 40 breaths
per minute.
SE-1000
2
Orient the conserving device
so that the control panel is
easily viewed and the cannula
tubing does not kink.
2
Attach the standard nasal
cannula to the cannula fitting
and to your nose and face.
Oxygen tubing up to 35 feet
long may be used in
PulseDose delivery mode.
5
When you are finished using
oxygen, turn the rotary
selector to the "OFF" position.
Close the cylinder.
3
Hand-tighten the nut until the
conserving device is secure.
3
Turn "ON" by turning the
rotary selector to the
prescribed flow setting. Always
confirm that the green and red
lights flash and you hear the
audible alarm beep at startup.
WARNING
To prevent injury from cylinders tipping
over, do not use cannula tubing lengths
over 10 feet with small compressed
oxygen cylinders. Unattended cylinders
should be secured in a cylinder stand.
EN - 7