Table of Contents
Advertisement
RUGGEDCOM i802
Installation Guide
Communication Ports
The RUGGEDCOM i802 can be equipped with various types of communication ports to enhance its abilities
and performance. To determine which ports are equipped on the device, refer to the factory data file available
through ROS. For more information on how to access the factory data file, refer to the ROS User Guide for the
RUGGEDCOM i802.
Each communication port type has a specific place in the RUGGEDCOM i802 chassis.
Figure 8: Port Assignment
1. Ports 1 to 6
2. Ports 7 to 8
Port
1 to 6
Ports 7 to 8
The following sections describe the available ports:
•
Section 3.1, "Copper Ethernet Ports"
•
Section 3.2, "Fiber Optic Ethernet Ports"
Section 3.1
Copper Ethernet Ports
The RUGGEDCOM i802 supports several 10/100/1000Base-TX Ethernet ports that allow connection to standard
Category 5 (CAT-5) unshielded twisted-pair (UTP) cables with RJ45 male connectors. The RJ45 receptacles are
directly connected to the chassis ground on the device and can accept CAT-5 shielded twisted-pair (STP) cables.
Copper Ethernet Ports
2
1
Type
Copper Ethernet Ports (10/100Base-TX)
Copper or Fiber Ethernet Ports (10/100/1000Base-TX or 1000Base-SX or 1000Base-LX or
100Base-FX)
Chapter 3
Communication Ports
11
Hide quick links:
Advertisement
Table of Contents
