Description - Siemens RUGGEDCOM i802 Installation Manual

Chapter 1
Introduction
Rated for Reliability in Harsh Environments
• Immunity to EMI and heavy electrical surges
• Hazardous Location Certification: Class I, Division 2
• -20 to +60 °C (-4 to 140 °F) operating temperature (optional -40 to +85°C or -40 to 185 °F)
• Conformal coated printed circuit boards (optional)
• Die cast aluminum enclosure
Memory Options
• Removable microSD/microSDHC card
Power Supply
• Dual low-voltage DC inputs: 24 VDC (9-32 VDC)
• Compression fit connections
• CSA/UL 60950 safety approved to 85 °C (185 °F)
Section 1.2

Description

The RUGGEDCOM i802 features various ports, controls and indicator LEDs on the front panel for connecting,
configuring and troubleshooting the device.
1
2
3
Figure 1: RUGGEDCOM i802
1. Failsafe Alarm Relay
Status LED 7. Fiber Optic or Copper Gigabit Ethernet Ports
(RJ-45)
• Failsafe Alarm Relay – Latches to default state when a power disruption or other alarm condition occurs. For
more information, refer to:
▪ Section 2.3, "Connecting the Failsafe Alarm Relay (If Equipped)"
▪ Section 4.3, "Failsafe Alarm Relay Specifications"
• Power Supply Terminal Block – A pluggable terminal block. For more information, refer to:
▪ Section 2.2, "Connecting Power"
2
5 6
4 7
2. Power Supply Terminal Block
8
3. Chassis Ground Terminal
8. Copper Ethernet Ports
Installation Guide
9 10
4. POWER LEDs 5. ALARM LED
9. Access Plate 10. RS-232 Console Port
RUGGEDCOM i802
6. Port
Description