Communication Ports - Siemens RUGGEDCOM i802 Installation Manual

RUGGEDCOM i802
Installation Guide
▪ Section 4.1, "Power Supply Specifications"
• POWER LEDs – Illuminate when power is being supplied to the device by the respective power source.
Color
Green
Red
Off
• ALARM LED – Illuminates when an alarm condition exists.
• Port Status LED – Indicates the status of the associated port.
State
Solid
Blinking
Off
• Communication Ports – Receive and transmit data, as well as provide access to the RUGGEDCOM ROS
Web interface. For more information about the various ports available for the RUGGEDCOM i802, refer to
Chapter 3, Communication
• Access Plate – The removable access plate provides access to the microSD/microSDHC slot. Use a microSD/
microSDHC card to load/store the firmware and configuration for the device. For information about using a
microSD/microSDHC card, refer to
• RS-232 Console Port – The serial console port is for interfacing directly with the device and accessing initial
management functions. For information about connecting to the device via the serial console port, refer to
Section 2.5, "Connecting to the
Description
Ports.
Section 2.4, "Inserting/Removing the MicroSD/MicroSDHC
Device".
Description
Device ready
Device booting up
No power
Description
Link
Activity
No link/activity
Chapter 1
Introduction
Card".
3