Input Ac Connections; Output Dc Connections - La Marche ULTRA SERIES Installation And Operation Manual

3.1

Input AC Connections

Connect AC wiring to the equipment per the image shown below. Refer to section 3.3 for recommended wire
sizes.
3.2

Output DC Connections

Connect Ultracap/battery DC cables to the equipment per the image shown below. Refer to section 3.3 for
recommended wire sizes.
Note: Verify that the connections are tight by tugging on the wires.
CAUTION:
When connecting the DC cables to the battery, be certain the positive terminal of the
charger is connected to the positive battery terminal and the negative terminal is connected to the
negative battery terminal
All National and local wiring codes must be followed. Wire insulation must be rated 90C or higher.
Note:
Figure 3 – Input Connections
Figure 4 – Output Connections
.
7