IBM System x3850 X5 Implementation Manual page 303

Figure 6-66 Editing the VMkernel settings in vSphere Client
4. Power off the x3850 X5 and unplug all power cords.
5. Attach the MAX5 to the x3850 X5. For more information, see 6.4, "Attaching the MAX5
memory expansion unit" on page 230.
6. Replug the power cords on x3850 X5 and MAX5 but
configuration.
7. Log in to the IMM web interface of the x3850 X5.
8. Click Firmware Update under Tasks, as shown in Figure 6-67.
Tasks
Power/Restart
Remote Control
PXE Network Boot
Firmware Update
Figure 6-67 IMM menu bar
9. Click Browse and select the Field Programmable Gate Array (FPGA) update file.
10.Click Update to start the update process. A progress indicator opens as the file is
transferred to the temporary storage of IMM.
11.When the transfer is complete, click Continue to complete the update process. A progress
indicator opens as the firmware is flashed. A confirmation page opens to verify that the
update was successful.
12.Unplug the power cords from the x3850 X5 and MAX5. Wait 1 minute and replug the
power cords. This procedure activates the new FPGA code on the x3850 X5 and MAX5.
13.Wait approximately 10 minutes to power on the x3850 X5. There cannot be any LEDs lit on
the Light Path panel. The System Health Status in the IMM web interface looks like
Figure 6-68 on page 284.
do not power on the complex
Chapter 6. IBM System x3850 X5 and x3950 X5
283