Table of Contents
Advertisement
1.5 Camera Display
After the camera has been switched on (power switch
set to „ON" or "TEST" position), the following information
will be shown on the display.
D
C
B
1!
1. SIM-card
2. Camera mode
3. Image resolution
4. Signal strength
5. Battery level
6. TV-connection
7. Mobile network provider
8. Date (Month/Day/Year)
9. Time (Hours/Minutes/Seconds)
10. Maximum numbers of images (according to the
*nicht im Lieferumfang enthalten
8
E
F
G
H
I
J
1)
memory capacity available)
11. Number of captured images
1.6 Email/MMS Function
IMPORTANT:
In order to avail of this function, it´s necessary to have
a mobile network provider1 as well as a suitable SIM-
card1. The extra costs generated are dependent on the
rates and conditions of your provider.
Prepaid cards may also be used. Please note that it is only
possible to recharge credit through your mobile phone
and not directly from the camera. The camera operates
mobile networking on the following frequencies: 850
MHz, 900 MHz, 1800 MHz and 1900 MHz. For more
information please read the section on „MMS Settings".
This camera can send images to your mobile device
via GSM/GPRS mobile network1. It´s also possible to
program the camera to inform you per SMS when the
camera is activated.
Once you have inserted a SIM-card* one of the following
icons is displayed:
Advertisement
Table of Contents
