Table of Contents
Advertisement
4.1.2 Set camera mode
There are two ways to set the camera mode:
1. Via shortcut key: Press
VIDEO or press
to set the camera mode to Photo.
2. Via Settings menu: The following shows how to set the
camera mode to VIDEO, provided that the previous
mode was PHOTO:
a) Press MENU to display the setting menu.
b) Press
to select MODE to change current mode.
c) Press
to select VIDEO.
d) Press OK to save the current setting.
e) Press MENU to cancel setting and return to info
display.
4.1.3 Reset to default settings
Follow these steps to reset to default values:
a) Press MENU to display the set-up menu.
b) Press
or
to select RESET.
c) Press OK to reset to default settings and return to info
display.
d) Press MENU to cancel setting and return to info
display.
18
to set the camera mode to
4.1.4 Set password
IMPORTANT: After password setting is activated
access is only possible through entering the correct
password. So please keep good note of your
password!
In the default setting password protection is disabled.
Follow these steps to set a password and protect your
camera menu against unauthorized access:
a) Press MENU to display the set-up menu.
b) Press
or
to select PASSWORD.
c) Press
to select ON.
d) Press OK to display "Set Password".
e) You will be prompted first to enter the old password
(old) and then to enter the new password (new) two
times.
If you are setting the password for the first time, you
cannot enter the old password. In this case press #
button to enter the next line.
- or -
If you already set a password, you have to type in this
password and confirm with OK.
f) Enter the new password (new) and confirm with OK.
Advertisement
Table of Contents
