Table of Contents
Advertisement
To use MMS/SMS or eMail functions, a suitable SIM-
card* must be inserted into the available card slot.
IMPORTANT:
This device operates only with Mini SIM-cards*. Micro
SIM-cards and Nano SIM-cards* are not compatible.
Please contact your mobile network provider for further
information about suitable Mini SIM-cards.
3.3 Switching the camera on
Before switching on, please pay attention to the
following:
1. Avoid temperature and motional disturbances in front
of the camera; for example air-conditioner, chimney
or other heat sources. This can have a negative effect
on the camera´s trigger function.
2. Select the camera location according to the objects
under observation. A height of 1-2 metres is generally
recommended.
3. Switch on the camera by sliding the power switch to
the ON position.
*not included with your purchase
12
Hint:
Before switching on the camera, you can use the
integrated laser pointer to align the camera to the
required monitoring area. Read more in section on
"Laser pointer".
After switching the camera on, the red LED indicator
blinks for approximately 10 seconds. This buffer allows
you to locate the camera according to wish. After the 10
seconds the camera automatically functions capturing
images or videos according to the selected mode.
IMPORTANT:
The remote control cannot be used when the camera is
in the "ON" position. The camera automatically captures
images or videos according to setting. The integrated
audio recorder allows you to record videos with sound.
3.4 TEST function
In order to capture user-defined imagery one can adjust
the settings by using the "TEST" function of the camera.
This is done by turning the power switch from the "OFF"
or "ON" position to the "TEST" position. Various features
such as user-defined settings, manual photography,
preview or manual MMS messaging can be selected
Advertisement
Table of Contents
