Remote Control; Entering Special Characters - Bresser 33-40000 Instruction Manual

Wildlife and observation camera
Table of Contents

Advertisement

F

1.4 Remote Control

Camera and password settings can be adjusted using
the remote control. The wireless infrared device has a
reception range of up to 9 meters.
Please note:
It can take up to 20 seconds, after the camera has been
switched on, before it receives signals from the remote
control.
The remote control has 15 function keys.
1. Select item (UP), Increase value
2. Make selection (OK)
*not included with your purchase
B
G
E
3. Select option (RIGHT)
4. Select item (DOWN), Decrease value
5. Select option (LEFT)
C
6. Display menus, Exit (MENU)
1.4.1 Navigation
D
Please note:
In order to navigate through the camera´s menu with
the remote control, an SD-card must be inserted and
„TEST" mode must be activated (power switch in „Test"
position).
1. Press „Menu" on remote control to start camera menu.
2. Press
or
menus.
3. Press
or
another menu point.
4. Press „OK" key to make a selction.

1.4.2 Entering special characters

Some helpful special characters may be entered using
the following key combinations:
1 . / : @ _
keys to switch between the different
kkeys to switch from a submenu to
0 + -
GB
7

Advertisement

Table of Contents
loading

Table of Contents