Table of Contents
Advertisement
ATTENTION:
Replace the SD-card* and SIM-card* only in the OFF
mode!
4.1 Settings
In order to avail of specific settings the remote control
has to be connected and a SD-card inserted. Now you
can change to the "TEST" mode explained before. Press
MENU on the remote control to open the "Settings"
menu on the camera´s display.
Setting items
Description
Camera Mode
Choice of function (Imagery or video)
Default Set
Resets all customer settings to default
values
Password
Set password to protect the camera
menu from unauthorized access
Send To
Select a setting to send images to your
mobile phone or by e-Mail:
1. Mobile phone (MMS): Send an image
to a mobile phone via WAP
2. Email (MMS): Send an image to an
E-Mail address via WAP
*not included with your purchase
14
Send To
3. Email (GPRS): Send an image to an
E-Mail address via SMTP. This method
of messaging is much cheaper in
some countries.
This method of messaging is much
cheaper in some countries.
Send Mode
3 different dispatch modes:
„Manual" for the function in TEST mode,
„Daily Report" or „Instant" for the function
in ON mode.
IMPORTANT:
Ensure that a fully functional SIM-card is
inserted.
1. „Manual": Select „Manual" when using
the TEST mode. Only single images
can be sent with this function. Videos
cannot be sent.
2. "Daily Report": This function is only
available in the ON mode. The camera
sends a text message at a specific
time with information about captured
images or videos up to that point.
If image capturing is set, you will
receive a MMS message with the last
image as well as information about
Advertisement
Table of Contents
