Table of Contents
Advertisement
g) Enter the new password (new) again and confirm
with OK.
h) Press MENU to cancel setting return to info display.
4.1.5 Set message recipient (Send To)
Here you can type in the mobile phone number or email
address of the MMS recipient. The following steps
describe how to setup MMS messaging to a mobile
phone (PHONE (MMS)), assuming that the previous
option was EMAIL (MMS):
a) Press MENU to display the set-up menu.
b) Press
or
to select SEND TO.
c) Press
to select PHONE (MMS).
d) Press OK to display the submenu.
e) Four input fields are available for selection. You can
switch between the input fields by pressing the #
button.
Press any keys to enter the necessary numbers,
letters or special characters.
- or -
Press
to delete your input.
f) Press OK to save the settings and return to info
display.
4.1.6 MMS-dispatch (Send Mode)
You can choose between 3 different MMS dispatch
options: Use the "Manual" option when using the
camera in "TEST" mode. The 2 other options, „Daily
Report" and „Instant", can only be used when the "ON"
mode is set. For further information on these functions,
please read the section on "Settings".
The following steps describe how to install the dispatch
option "Instant", provided the camera is set to "OFF".
a) Press MENU to display the set-up menu.
b) Press
or
to select SEND MODE.
c) Press
to select the option „Instant".
d) Press OK to enter the submenu.
e) Press
to determine the maximum amount of
images to be transmitted. You have a choice
between the following predefined options: 00-99 or
unlimited.
f) Press OK to save settings and exit the set-up menu.
Please note:
For "Daily Report" dispatch, the camera requires
information on the length of time, in hours and minutes,
which it should transmit.
GB
19
Advertisement
Table of Contents
