Display Nomenclature; Main And Auxiliary Displays - Gefen EXT-DVIK-MV-441 User Manual

Solo
USB

Display Nomenclature

4
The 4x1 DVI KVM Multiview Switcher uses has two output ports on the rear panel: Video
A and Video B. The Video A port is used to display the video modes (Full, PIP, Quad, and
PAP) and is referred to as the main display.
The Video B port is used to display the currently selected source and is referred to as the
auxiliary display. Each of these displays serve a unique function and cannot be changed.
For example, the auxiliary display can never display more than one source at a time.
Video A DVI-D
RS-232 Out
Main display (Video A)
Information
Video A is scaled and the resolution can be set using the #set_output
command. Video B is pass-through and cannot be scaled.
Audio

Main and Auxiliary Displays

Video A Video B
Keyboard Mouse
USB USB
Video B DVI-D
Workstation
page | 14
Menu/Back
Select
Mic L/R Out Mic L/R In USB Host
DVI-D In
Source 1
Auxiliary display (Video B)
Full PIP Quad
4x1 DVI
Mic L/R In USB Host
DVI-D In
Source 2
Mic