Adjustment Of The Machines Effected By Authorised Service Technician During The First Setting In Operation; Commissioning - Meiko M-iClean Operating Instructions Manual

Operating instructions Glass-, Dish- and Utensilwashing machine
M-iClean
Risk of injury, damage to property!
Due to inappropriate working with the dishwashing machine.
The chapter "General safety instructions" must be read and understood by all per-
sons who will operate or make service, resp. repair works on the machine.
9712938
7 Adjustment of the machines effected by author-
ised service technician during the first setting in
operation
7.1

Commissioning

Commissioning and training will be handled and provided by MEIKO- authorised
service technician. The operator must not use the machine before completing train-
ing.
To avoid damages or dangerous injuries during the setting in operation of the
dishwashing machine, please observe the following points:
Any required initial inspections on supplied parts, such as external water treatment
units are mandatory. More detailed information, if required, can be found in the rel-
evant operating instructions.
Before the first start, check if all tools and foreign parts are removed out of the in-
stallation.
Make sure that any liquid spills have been removed.
Activate all the safety systems and door switches before commissioning.
Check that all screw connections are tight.
If the machine display does not light up on initial commissioning (no boot, icon
such as the MEIKO logo is not lit) check circuit breaker F1 (line circuit breaker).
Read the chapter "General safety instructions".
The "Commissioning certificate for GiO modules" must be observed for machines
equipped with a GiO module and the instructions adhered to accordingly.
We reserve the right to change execution and construction!
Page 20 of 48
WARNING