Operating instructions Glass-, Dish- and Utensilwashing machine
M-iClean
9712938
12
Maintenance and care
12.1 Care, general
The machine has been designed to keep the need for cleaning, care and mainte-
nance to a minimum.
However, for reliable, safe and long-term function of the machine, and in the inter-
est of hygiene and cleanliness, correct care and maintenance is necessary.
12.2 Care of stainless steel surfaces
We recommend cleaning the stainless steel surfaces only when needed with
cleaner and care products suitable for stainless steel.
Lightly soiled parts can be wiped with a (possibly damp) cloth or sponge.
Be sure to wipe dry after cleaning to avoid traces of scale. Use demineralized wa-
ter if possible.
Do not use aggressive cleaning or scouring agents.
The care products must not attack the stainless steel, form deposits, or cause dis-
coloration.
Never use cleaning agents that contain hydrochloric acid or bleaches based on
chlorine.
Never use cleaning equipment that you have used previously by non-stainless
steel to avoid external corrosion.
Aggressive external influences due to cleaning and care products that evaporate in
the vicinity of the dishwashing machine, or caused by direct application, can lead to
machine damage and put the material at risk (e.g., aggressive tile cleaners).
Caution!
Observe the manufacturers' safety rules on the original packing and safety data
sheets.
12.3 Descaling
If the machine has been operated with hard water, the boiler and wash tank could
have lime scale deposits. Descaling of the tank interior, boiler housing, tank heat-
ing, boiler heating and washing and final rinse system then becomes necessary
Use service code "40044" to access authorisation level 4. At this level you can se-
lect the "descaling" function (for the wash chamber) in the action menu.
In the dosing system tab of the i-menu you can adapt the descaling time and tem-
perature.
For descaling the appliance use only products suitable for industrial dishwashers.
Please observe the product manufacturers' instructions.
12.4 Dimensions, technical data, installation instructions
See MEIKO technical sheet
We reserve the right to change execution and construction!
Page 31 of 48