Operating Errors; Self-Help In Case Of Faults - Meiko M-iClean Operating Instructions Manual

Operating instructions Glass-, Dish- and Utensilwashing machine
M-iClean
9712938
14

Operating errors

Despite being expertly designed, the machine may develop minor faults which are
usually easy to eliminate. This section explains a number of possible problems and
how you can deal with them yourself.
Before carrying out work on the open machine, it MUST be de-energised. Switch
the machine off completely via the on-site circuit breaker.
Should any of the operational faults described arise repeatedly, their cause must
be established in each case.

14.1 Self-help in case of faults

Faults:
Machine does not fill!
Final rinse does not spray!  No water present. Open the shut-off valve.
Stripes and smears on the
dishes!
Formation of a significant
amount of foam in the
wash tank!
As a rule, faults that are not described herein require assistance from an author-
ised service technician. Please contact your factory representative or authorised
dealer.
We reserve the right to change execution and construction!
Page 33 of 48
Cause, remedy
 No water present. Open the shut-off valve.
 Dirt trap blocked. Clean dirt trap.
 Machine door open. Close the door.
 Dirt trap blocked. Clean dirt trap.
 Unsuitable rinse agent or wrong dispensed quantity.
 Manual detergent and foaming detergents. Do not
use a foaming detergent for pre-cleaning or clean-
ing of the machine. Foam can cause malfunctions
in the dish-washer and a poor wash.
 Detergent or rinse aid product not suitable