Forming Cables - NEC Promise SuperTrak EX8350 User Manual

26

5-7. Forming Cables

To fix the SATA and I2C cables appropriately, form the cables in the following procedure.
Attachment of cable clamp
1.
Attach the cable clamp coming with the card on the server. Attach the cable clamp at an arbitrary
position where cables can be fixed securely. Some servers do not have any area available for the
attachment of the cable clamp. If so, bundle cables so that they may not be disordered.
Check
Cable forming
2.
Release the lock of the cable clamp. Bundle the cables to fix them.
After forming the SATA cable, make sure that the cable is not loose and inserted to the
mating connector straight.
Notice
Bottom plate of
chassis of server
Before attaching the cable clamp on the server, wipe the area where the cable clamp
will be attached with dry cloth.
Some servers require their accessories to be used instead of the cable clamp coming
with the card. For details, refer to the User's Guides of the servers.
Cable clamp
Cable clamp
LED cable
SATA cable
I2C cable