Transfer To Third Party; Disposal; Data Backup; Transportation - NEC Promise SuperTrak EX8350 User Manual

Disk array controller (sata2)
Hide thumbs Also See for Promise SuperTrak EX8350:
Table of Contents

Advertisement

12

Transfer to Third Party

Make sure to provide this manual along with the product to a third party.
About data on the hard disk
Be sure to take appropriate measures not to leak important data (e.g., customers' information or
companies' management information) on the removed hard disk to any third parties.
Data seems to be erased when you empty "Recycle Bin" of Windows or execute the "format"
Notice
command of the operating system. However, the actual data remains written on the hard disk. Data
not erased completely may be restored by special software and used for unexpected purposes.
It is strongly recommended that the software or service (both available at stores) for data erasure
should be used in order to avoid the trouble explained above. For details on data erasure, ask your
sales representative.
NEC assumes no liability for data leakage if the product is transferred to third party without erasing
the data.
To transfer or sell any software application that comes with the product to a third party, the following
requirements must be satisfied:
All provided software applications must be transferred and no backup copies must be retained.
Software applications must be uninstalled before transferring the product.

Disposal

Dispose of the product according to all national laws and regulations.
It is the user's responsibility to completely erase or modify all the data stored in storage device such
as hard disk, backup data cartridge, floppy disk, or any other media (CD-R/CD-RW) so that the data
cannot be restored.
Notice

Data Backup

The device failure due to shock or thermal changes, as well as operator's misconduct, may cause loss of
data. To avoid loss of data, we recommend that you should make a back-up copy of your valuable data on a
regular basis.

Transportation

To transport the product, remove the product from the server and put it in the shipping carton along with
accessories according to Chapter 1.

Maintenance Parts

The holding period of maintenance parts of the BBU is five years from the truncation of manufacturing.

Abbreviations

Formal title
Disk Array Controller (SATA2) User's Guide
Disk Array Controller (SATA2)
Additional DAC Battery
SATA2 HDD Cage
Web-based Promise Array Manager
Operation System
Hard disk drive
Abbreviation
this manual
disk array controller or card
additional battery
additional HDD cage
WebPAM
OS
HDD

Advertisement

Table of Contents
loading

Table of Contents