Table of Contents
Advertisement
54
Check the connection status of HDDs connected to each port.
4.
[Check items]
Whether all HDDs connected to the disk array controller are recognized.
Whether the capacities of the HDDs are indicated correctly and whether all the HDDs have the
same capacity.
Whether every "Status" indicates "Free".
Notice
Use an arrow key [↑] or [↓] to move cursor to HDD to be used for logical drive, and press the
5.
<Space> key to select it. The selected HDD is preceded by an asterisk (*) and displayed in yellow.
When you have selected all the HDDs to be used, move the cursor to [Next] and press the <Enter>
key to open [Create (Step 2/2)] screen.
If HDDs of different capacities are connected, contact your service
representative.
If a new HDD or a HDD replaced for maintenance is connected and
"Status" is not "Free", contact your service representative.
Advertisement
Table of Contents
