Table of Contents
Advertisement
Maintenance
WARNING.
When performing any maintenance ensure the
plug of the appliance is removed from the power source.
Air flow through the heat gun is important. Keep the side
air vents clear of debris and dirt build up by using a small
brush.
Do not use solvents or flammable cleaning solutions, and
never operate the heat gun to clear out vents.
Keep the slide switch clean and free of dirt. Grit could jam
the slide.
Keep the housing of the heat gun clean using a soft damp
cloth or similar cleaning cloth.
Solvents, detergents, and cleaners should not be used.
Cordset replacement
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualifies persons
in order to avoid a hazard.
13
Advertisement
Table of Contents
