System Reset - Goodmans GMC1502WF User Manual

15 Troubleshooting
USB or SD/MMC
Problem
Files will not
playback from a
USB device or the
Card
If none of the above solves your problem, perform a system reset

System Reset

A system reset can be performed to
return the Micro System to the factory
default settings.
To perform a system reset using the
Remote Control:
Make sure the Micro System is in
standby mode.
Press the MENU button.
Use the I
select SYSTEM RESET.
Press the OK button.
Press the OK button again. The LCD
screen will show RESETTING.
The Micro System has now been
reset.
To perform a system reset using the
buttons on the Micro System:
Make sure the Micro System is in
standby mode.
60
Possible Cause
1. The USB device or
the Card are not
connected properly.
2. Unsupported files.
as described below.
or I buttons to
What to do
1. Make sure the USB device or
card is securely connected.
See page 48 for more
information.
2. Only WMA or MP3 file types
are supported. See page 48
for more information.
Press the MENU button.
Use the I or I buttons to
select SYSTEM RESET.
Press the SELECT button.
Press the SELECT button again. The
LCD screen will show RESETTING.
The Micro System has now been
reset.
Need extra help?
Don't worry we are just at the
other end of the phone. If you are
experiencing problems using your
new product, before returning it to
the retailer, just call 0871 230 1777.
Need a spare part?
In the unlikely event of you need-
ing spare parts, please contact our
spares department on:
0871 230 0790