Goodmans GMC1502WF User Manual page 52

14 Alarm and Timer
You can set the alarm to sound at
different frequencies. The available
frequencies are:
• Once
• Daily
• Weekday
• Weekend
Press the OK button. The alarm has
now been set and the LCD Screen
will show the initial alarm screen.
Press the ALARM button.
DON'T FORGET! If you have
set the alarm function using the
control panel of the Micro System,
the Micro System will return to
standby after approximately 20
seconds.
Turning off the alarm
To turn off the alarm when it sounds,
press the ALARM button.
To temporarily snooze the alarm,
press the SNOOZE button. The
alarm will sound again in 9 minutes.
To disable the alarm permanently,
press the ALARM button. SET
ALARM will be shown on the LCD
Screen. Select DISABLE. Press the
OK button.
52
Timer
The Micro System has timer function
to turn the Micro System on and off at
a specific time. Make sure you have
correctly set the clock time to use the
timer function.
To set the timer, press the TIMER
button. SET TIMER will be shown on
the LCD Screen.
Press the I or
ENABLE the timer and then press
the OK button. SET ON TIME will be
shown on the LCD Screen.
Press the OK button. SET ON TIME
will be shown on the LCD Screen.
Use the I or
adjust the hours.
Press the OK button. SET MINS will
be shown on the LCD Screen.
Use the I or
adjust the minutes.
I buttons to
I buttons to
I buttons to