Table of Contents
Advertisement
USB and CARD
• P01 - stands for the first program
location.
• 01 - stands for folder number.
• 001 - is the file number.
Select a folder. Press the OK button.
Select the file for the first program
location.
Press the MEMORY button to store
the selected file in the first program
location.
Repeat step 3, 4 and 5 to program
more files. Up to 99 files can be
programmed.
Once you have programmed all
the files, press the
playback of the programmed files.
PROGRAM will be shown on the
bottom of the LCD Screen.
DON'T FORGET! Playback will
stop after all programmed files
have played.
To replay the programmed files,
press the MEMORY button again
and then press
/ II button.
To cancel the programmed sequence
from the MEMORY, press the
STOP/■ whilst playing.
Disconnecting the USB device or
SD/MMC card:
/ II to start
Press the STOP/■ to stop playback
of any track.
Press the STANDBY button.
Now simply unplug the USB device
from the connector or remove the
SD/MMC card from the card slot.
12
49
Advertisement
Table of Contents
