Goodmans GMC1502WF User Manual page 48

12 USB and CARD
Select a folder (where applicable).
Use the I
previous file.
Use the I button to skip to the
next file.
Press and hold the I
buttons to scan backwards or
forwards within the same file.
Release the button to resume
playback at normal speed.
Press the STOP/■ button to stop
playback.
Playback of USB or SD/MMC media
repeatedly or randomly:
You can repeat a single file, all files or a
folder. The following repeat modes are
available:
• REPEAT ONE - repeats a single file.
• REPEAT ALL - repeats all the files.
• REPEAT FOLDER - repeats all the
folders.
To repeat a single file:
Select a file.
Press the REPEAT button repeatedly
until REPEAT ONE is shown on the
LCD Screen.
The selected track or file plays
continuously until you press the
STOP/■ button.
48
button to skip to the
or I
To repeat all the files:
Press the REPEAT button repeatedly
until REPEAT ALL is shown on the
LCD Screen.
The entire contents will play
continuously until you press the
STOP/■ button.
To repeat a Folder:
Select a folder.
Press the REPEAT button repeatedly
until REPEAT FOLDER is shown on
the LCD Screen.
The selected folder plays
continuously until you press the
STOP/■ button.
Random Play:
The files can be played in a random
order.
Press the RANDOM button to turn
on the random mode. RANDOM will
be shown on the LCD Screen.
Press the RANDOM button again to
turn off the random mode.
Programme Track Selection:
You can programme the Micro System
to play up to a total of 99 files in any
desired order. You can also program the
same file to play several times within a
program sequence.
When in USB or CARD mode, press
the STOP/■ button to stop any file
playback.
Press the MEMORY button. P01
01-001 shows on the LCD Screen.