Arctic Cat Sno Pro 120 2011 Service Manual page 513

2. On the Crossfire, secure the sway bar link to the
front arm with the cap screw and lock nut. Tighten
the lock nut to 96 in.-lb.
3. Place the center belly pan into position; then secure
with the 15 torx-head screws.
4. Place the air silencer into position on the front bum-
per; then install the center belly pan screws and
secure with the three torx-head screws.
5. Secure the arms to the spindle with existing hard-
ware. Tighten the upper arm lock nut and cap screw
to 30 ft-lb and the lower arm lock nut and cap screw
SC078A
to 30 ft-lb (M-Series) or 40 ft-lb (CFR/Crossfire).
6. Secure the tie rod to the steering arm with the Allen-
SC081
head cap screw (threads coated with green Loctite
#609). Tighten to 30 ft-lb.
7. Place the front shock absorber into position; then
secure with existing hardware. Tighten to 20 ft-lb.
SC084
Manual
Table of Contents
SC077A
CM269B
8
SC080A
8-23