Table of Contents
Advertisement
SECTION 13
ERROR CODE LIST CONT.
Error Number
Wrong Film type. Please load different Film to
10
continue or press cancel to clear print job.
Ultra Electronics Card Systems
Displayed Error
Rio Pro Maintenance Manual
Error Code
Error is shown while advancing the Dye-Film to a specific
position within a certain colour panel (for example, moving
the Film into a position where it can be used for printing).
If the panel requested is not present in the loaded Film
10:00
type (for example, a colour panel was requested when
black only Film was loaded the error will be displayed.
This error should never arise in practice, as print jobs are
rejected if they are not compatible with the loaded Film.
Error can be shown while determining the print cycle
sequence for the current print job using a colour type Film.
In other words, Film having a YMCKO configuration, if the
image cannot be printed using the loaded Film this
10:01
particular error will be displayed. It may not arise in
practice unless short panel colour Film is supported in the
future, and the user attempts to print an image which
contains too many lines of data in a particular colour.
Error can be shown while determining the print cycle
sequence for the current print job using single colour type
Film. In other words, continuous resin only type Film, if
the image cannot be printed using the loaded Film this
10:02
particular error will be displayed. This particular error may
arise if the user manages to send a print job file requiring
either colour or Overcoat to a machine which has single
colour only Film fitted.
Error can be shown while determining the print cycle
sequence for the current print job using black and
Overcoat type Film. In other words, Film with a KO
configuration, if the image cannot be printed using the
10:03
loaded Dye Film this error will be displayed. This
particular error may arise if the user somehow manages
to send a print job file requiring colour to a machine which
has MA600KO Dye Film fitted.
Error can be shown while determining the print cycle
sequence for the current print job using colour film with
the extra black resin panel type film. In other words, film
with a YMCKOK configuration. If the image cannot be
10:04
printed using the loaded Dye Film, this error will be
shown. This particular error may not arise in practice
unless short-panel colour Dye Film is supported in the
future, and the user attempts to print an image which
contains too many lines of data in a particular colour.
Error is shown while validating the downloaded print job
against the capabilities of the Dye-Film. If colour data is
sent while monochrome fFlm (K or KO) is fitted an error
10:05
will be displayed. The Printer Driver should normally
prevent this from happening, but it is possible to by pass
the Driver by sending PRN‟s directly to the Printer.
10:06
- 69 -
Description of Problem
Advertisement
Table of Contents
