Table of Contents
Advertisement
Tone/LipSync
With button 26 "TONE/LIPSYNC" you can
adjust the sound and the audio delay.
Adjusting sound
Briefl y tap button 26 "TONE/LIPSYNC"
to access two audio control ranges suc-
cessively: base (low tones, basses),
treble (high tones)
• With the arrow buttons 27 „/" now
adjust the selected range from "–10"
(decrease) to "+10" (increase).
• To fi nalise the setting press button 28
"RETURN".
Setting audio delay
By pushing and holding button 26 "TONE/
LIP-SYNC" for more than a second you
can adjust the audio delay (see the menu
function "LIP SYNC" on page 19) for the
active input:
• The current value in milliseconds (ms)
is shown in the display panel and on the
screen (ms).
• With the arrow buttons 27 „/" set the
audio delay within a range from 0 to 200
ms.
• To exit the setting push button 28
"RETURN".
Direct
In direct mode, the audio signal is emitted
without sound adjustment.
• Tapping button 35 "DIRECT" displays
the current setting: Direct OFF –
normal mode with sound adjustment.
Direct Mode – direct mode without
sound adjustment.
• Tapping the "DIRECT" button 35 again
changes the mode.
Info
Pushing button 36 "INFO" shows
information on the current audio signal
on the screen and in the display panel for
approx. 3 secs., e.g. "48 KHz 2.1 stereo".
SEITE 22
Sleep
You want to fall asleep with music? This
automatic deactivation function will help
and turns off the control unit after a preset
time elapses (max. 60 mins.).
• Briefl y press button 20 "SLEEP" once to
show the status of the automatic deac-
tivation function: "Sleep Mode OFF" –
function disabled. "Sleep Timing xx min"
– deactivation in xx mins
• With arrow buttons 27 „/" select the
desired time for deactivation within a
range from 15 to 60 mins.
• To exit the setting press button 28
"RETURN".
The system will deactivate after the preset
time has elapsed.
37
36
35
20
26
27
28
Advertisement
Table of Contents
