Input Jacks For Playback Sources - Teufel hulsta Manual

Input jacks for playback sources

The control unit provides you with three
HDMI inputs for digital audio/video
signals ("HDMI" 1, 2 and 3), three
analogue sound inputs ("AUX" 1, 2 and
3) and one optical and two coaxial sound
18
inputs.
HDMI 1, 2 and 3
You can connect one playback source
with digital picture and sound signals to
each jack 18 (e.g. PC, Blu-ray player
or games console). To do so you require
an HDMI cable.
If a unit does not issue the sound via
HDMI, you can allocate one of the sound
inputs of the control unit to this source in
the menu.
OPTICAL
You can connect the optical digital sound
output of a playback source to jack 8. To
do so you require an optical cable with
a TOSLINK plug. Your playback source
requires either an optical 3.5-mm jack or
again a TOSLINK jack.
8 9 11 12
COAXIAL 1 und COAXIAL 2
You can connect the coaxial digital sound
outputs of two playback sources to
the jacks 9. To do so you require one
coaxial cable each with cinch plugs.
If the ARC function is activated, the
connection 9 "COAXIAL 1" is no longer
available.
AUX 1, 2 and 3
You can connect playback sources with
analogue sound to jacks 11 and 12.
The jack 11 "AUX 1" is a 3.5 mm
plug jack for connecting, e.g., an
MP3 player. The jacks 12
"AUX 2" and "AUX 3" are cinch jacks,
e.g. for connecting a cassette or tape
player. The Bluetooth receiver is connec-
ted to jack 12 "AUX 2". When connecting a
record player which does not have a
line output, you require a preamplifi er.
SEITE 10