Fax +49 (0)30 / 300 930 930 absolutely sure to hold onto the pack- E-mail: service@teufelaudio.com aging. We can only accept the return of the Rockster WITH THE ORIGINAL teufelaudio.com PACKAGING. Empty boxes are not available! • Rockster...
This signal term indicates a low risk, which, if not avoided, may Proper use result in minor or moderate The ROCKSTER is intended for the injury. amplification and playback of music and spoken word from external source NOTICE...
Page 5
Improper electrical installation facturer. or excessive mains voltage may – Do not use the ROCKSTER in result in an electrical shock. environments where there is – The device is suitable for a a risk of explosion.
Page 6
Danger of tions: suffocation. – If the ROCKSTER is not secure- – Ensure that children do not ly mounted, do not use it in remove small parts from the vehicles, in unstable locations,...
Page 7
– Keep the rechargeable battery medical attention. away from paper clips, coins, NOTICE keys, screws or other metal- If the ROCKSTER is subjected to lic objects that could bridge warm temperatures after being the contacts. Short circuiting cold (e.g. after transport), con- caused by bridged recharge- densation may occur inside of it.
Page 8
– Do not expose the ROCKSTER – Store your rechargeable bat- to direct sunlight. tery in a cool, but frost-free area, ideally at 15 °C. Higher – Do not place the ROCKSTER temperatures result in a high- near heat sources (e.g. heat- er rate of self-discharge and ers, ovens).
The ROCKSTER weighs more than 30 kg! – Have a 2nd person assist you. • Carefully open the box, take out the EPE foam half-shell and carefully lift the ROCKSTER out of the box. Product contents 1x Rockster 1x mains cable 2x wheel...
Introduction The ROCKSTER is an active speak- Connection examples for ROCKSTER in er system. By connecting multiple master-slave operation ROCKSTERs in master-slave operation, you can even completely supply large rooms with sound. The power supply can be provided via the mains, the built-in rechargeable...
Operational Controls and Connections ROCKSTER Item Description Cover cap for the mixing console Mixing console Carrying handles Connection and control terminal Rechargeable battery compartment Wheels • Rockster...
POWER MODE Toggle for power supply 5V OUT DC USB port for the power supply of mobile devices MASTER OUT Stereo connection for master operation with a second ROCKSTER (male XLR plug) – Mains fuse MAIN POWER Mains connector jack POWER Main power switch EXT.
6. Screw the counter nuts tight by turning them clockwise. 7. Place the ROCKSTER on the wheels. 8. Check whether all wheels have proper contact with the ground to prevent the ROCKSTER from jiggling. If necessary, loosen the counter nut...
9. Put the cover back on the recharge- able battery compartment. 10. Screw the six screws back in place. The rechargeable battery is only partial- ly charged when delivered. You must fully charge the rechargeable battery before first start-up (see page 27). • Rockster...
• Lay the connector cables so that they do not pose a tripping hazard. • Do not place any heavy objects on the cables or the ROCKSTER. • Push the fixing brake on the rear wheels to secure the ROCKSTER so that it cannot roll away.
Connecting Inputs MASTER IN (17) Only in master/slave operation with multiple ROCKSTERs: The ROCKSTER operated as a slave is sent an audio signal via these female XLR connec- tions. The following inputs are connected to the mixer channels via the source...
Outputs MASTER OUT (27) Only in master/slave operation with multiple ROCKSTERs: The ROCKSTER operated as a master transmits its audio signal to the devices operated as a slave via these connections. If possible, use properly shielded, crush-proof stage cable for this con- nection.
12 V power cable, an available accessory (see page 28). Switching on and to standby With the ON/OFF (36) button, you can switch the ROCKSTER on or to standby. When switched on, the power indicator (37) will be illuminated in green. • Rockster...
Master/slave operation With the INPUT SELECT (21) switch, you determine whether the ROCKSTER operates as a master or slave: • Master The mixing console is active when the switch is set to “CHANNEL 1/2”. The mixing channels are transmitted to the slaves via the speakers and the MASTER OUT (27) output.
• Turn the control clockwise to in- crease the volume. • Turn the control counterclockwise to decrease the volume. If the ROCKSTER is operated as a slave, you can decrease the volume with respect to the master with the MAIN VOLUME (23) control. However, the maximum volume is controlled on the master.
(see page 26) LINE 2 Connection(18) Connection (19) Cross fading With the cross fader (12), you can determine which mixing channel is assigned to the speakers: • Channel 1: control to the left. • Channel 2: control to the right. • Rockster...
• Thus, a reverberation effect can be mixed in for both inputs. • In addition, a guitar-specific equal- iser is simulated for the instrument input and the control range on the mixing console is adjusted to frequencies that are suitable for guitars. • Rockster...
® The ROCKSTER will now play back Bluetooth all sounds that would otherwise be You can connect compatible devices played back by your source device. such as most smartphones with your ® The corresponding Bluetooth ® ROCKSTER via Bluetooth . The audio will be on permanently.
The rechargeable battery The maintenance-free internal re- chargeable battery is charged as soon as the ROCKSTER is connected to the mains and the main power switch POWER (30) is switched on. The left LED BATTERY STATUS (33) illuminates during charging.
Optional Accessories You can order the following accesso- ries from our webshop (www.teufelau- dio.com): Rain cover The rain cover protects the ROCKSTER in the event of the sudden onset of rain. CAUTION Operating the ROCKSTER with the rain cover on results in severe overheating and may cause a fire.
ROCK- STER with the 12 V power cable via a 12 V car battery. 1. Switch the ROCKSTER off. 2. Open the pole terminals of the pow- er cable. 3. Plug the red pole terminal onto the...
Such cleaning agents may direct sunlight. damage the delicate surface 3. Store the ROCKSTER in a dry loca- of the housing. tion at a temperature of + 10 to + • Ideally, you should remove dust or 40 °C.
(see page 3). Take note of the warranty instructions. Problem Possible cause Solution The Rockster is off or Activate the Rockster with the main power Rockster doesn’t have any power. switch (30). Check the mains cable and doesn't socket.
Page 32
® Bluetooth tion. mode. ROCKSTER has not On your source device, select “ROCKSTER been selected as the 1” or “ROCKSTER 2” as the output device ® output device. via Bluetooth ® Bluetooth connection Set up the ROCKSTER and/or source de- impaired by another vice in another location.
Dimensions (W x H x D) 577 x 866 x 474 mm Weight 31.5 kg Operating voltage 230 V~, 50/60 Hz Max. power consumption 500 watts You can find further technical data on our website. Technical changes reserved! • Rockster...
Page 34
We herewith confirm that the appliance as detailed below complies with the mentioned directives. Rockster Artikelbezeichnung: Article description: Teufel Lautsprecher GmbH Firmenanschrift: Budapester Straße 44 Company address D-10787 Berlin Einschlägige EG-Richtlinien / Governing EU-directives / Directives CE concernées : 1.
Page 36
Please contact our customer service with any questions, suggestions or criticism: Lautsprecher Teufel GmbH Phone: 00800 - 200 300 40 (toll-free) BIKINI Berlin Fax: +49 (0)30 - 300 930 930 Budapester Strasse 44 www.teufelaudio.com 10787 Berlin (Germany) No responsibility is assumed for the correctness of this information.
Need help?
Do you have a question about the ROCKSTER and is the answer not in the manual?
Questions and answers