Surround; Test Tone; Channel Level Buttons; Dimmer - Teufel hulsta Manual

Special function buttons

Surround

With button 40 "SURROUND" you can
switch the surround mode in the following
order:
2.1 Stereo Stereo only via front left/
right and subwoofer
3.1/5.1 Stereo across all channels
Stereo (upmix)
Dolby PLII Dolby ProLogic II for
Movie movies
Dolby PLII Dolby ProLogic II for music
Music
DTS NEO:6 DTS NEO:6 for music
Mus
DTS NEO:6 DTS NEO:6 for cinema
Cin
Some options may not be available if not
all satellite speakers are connected.
Dolby Digital and DTS (Standard and
HD)
The surround mode is fi xed for Dolby
Digital or DTS coded multi-channel tracks;
this menu is therefore not available while
these formats are.

Test tone

With this function you can monitor and set
the level for the speaker channels.
• Press button 33 "TEST". The test sound
("pink noise") will be emitted on all spe-
akers one after another.
• With arrow buttons 27 „/" or button
32 "CH SEL" you can select the desired
channel.
• With buttons 27 „/" or select buttons
31 "LEVEL +/–" you can adjust the volu-
me from "–10" to "+10".
• To stop the test sound, push button 28
"RETURN".
We recommend using a Teufel sound level
meter, which you can order from our
website www.teufel.de on the accessories
page.

Channel level buttons

Here you can increase and decrease the
relative volume for each speaker, even
during playback.
• Select the desired speaker by pushing
button 32 "CH SEL" several times.
Sub – Subwoofer
Left – front left
Right – front right
Center – centre
Sur. L – surround left
Sur. R – surround right
(The surround channels are only
available in 5.1 mode.) With select
buttons 31 "LEVEL +/–" you can adjust
the relative volume within the range from
"–10" to "+10".
• To exit the function, push button 28
"RETURN".

Dimmer

With button 34 "DIMMER" you control
display panel brightness. The display
brightness changes everytime you push
button: right, medium, dark, off.

Equalizer

As with the menu function (see
page 18), this provides you with fi ne
sound adjustment in nine frequency
bands.Possible values: each from –20 dB
(decrease) to +6 dB (increase).
• Press button 38 "EQUALIZER".
• With arrow buttons 27 „/" select the
desired frequency and with buttons 27
„/"set the level within the range from
–20 dB (decrease) to +6 dB (increase).
• To fi nalise the setting press button 28
"RETURN".
Note: The equalizer is inactive with some
high defi nition formats.
SEITE 21