Toshiba ras-m16g3dv-e Service Manual page 90

Using the Service monitor with the [
Room A
Test
Cool
Mode Fan Speed
Monitor Function
Code Data
00 0024
Return
Refer to "3. Monitor function" for details.
2. Function selection setup
Perform the advanced settings for the air conditioner.
Carry out the setting operation while the indoor unit is stopped. (Turn off the air conditioning unit before starting
the setting operation.)
Field setting menu
1.Test mode
2.Register service info.
3.Alarm history
4.Monitor function
5.FC setting
Return
Set
FC setting
Code
(FC) Data
10 0000
Return Fix
< >
FC setting
Code
(FC) Data
10 0001
Return Fix
< >
FC setting
Continue?
Return
Yes No
MONITOR] button during the test mode
12:00
Push the [ MONITOR] button
1
Push the [ MENU] button to display the menu screen.
2
Push and hold the [
same time to display the "Field setting menu".
Push and hold the buttons for more than 4 seconds.
3
∧] / [
Push the [
"Field setting menu" screen, then push the "
F2] button.
The fan of the indoor unit operate.
Move the cursor to select "Function code" with the "
F1] button, then set "Function code" with the [
button.
Move the cursor to select "data" with the "
button, then set "data" with the [
4
Push the [ MENU] button to set the other Function codes. After
"Continue?" is displayed on the screen, push the "
Yes" [ F1] button.
5
Push the "
No
operation. " " appears on the screen for a while, then the screen
returns to the "Field setting menu" screen.
Pushing the "
No
selection screen when the group control is used. Push the [
CANCEL] button on the unit selection screen to finish the setting
operation. " " appears on the screen for a while, then the screen
returns to the "Field setting menu" screen.
– 89 –
MENU] button and the [
∨] button to select "5. FC setting" on the
>
∧] / [ ∨] button.
No" [ F2] button to finish the setting
No" [ F2] button displays the unit
∨] button at the
Set" [
Set
<" [
<
∧] / [ ∨]
>" [ F2]
Yes