Toshiba ras-m16g3dv-e Service Manual page 50

10-4. Installation
CAUTION
Strictly comply with the following rules to prevent damage of the indoor units and human injury.
• Do not put a heavy article on the indoor unit or let a person get on it. (Even units are
packaged)
• Carry in the indoor unit as it is packaged if possible. If carrying in the indoor unit unpacked by
necessity, use buffering cloth or other material not to damage the unit.
• To move the indoor unit, hold the hooking brackets (4 positions) only.
• Do not apply force to the other parts (refrigerant pipe, drain pan, foamed parts, resin parts or
other parts).
• Hanging bolt pitch of air intake chamber side is different (centre position), make sure not to make
mistake to install the setting direction.
• Carry the package by two or more persons, and do not bundle it with plastic band at positions
other than specified.
• To install vibration isolation material to hanging bolts, confirm that it does not increase the unit
vibration.
External dimensions
80
100
90 knockout hole
(For air taking-in)
A
Hanging bolt pitch
B
Unit external dimension
C
(Outside)
Electrical control box
– 49 –
Hanging bolt
25
or less
(Only the position of
an access cover.)
(Unit: mm)
187
155
58
35
37
173
Wires
drawing-out port
Model type A
M07,10,13G3DV 770
M16G3DV 970
(Unit: mm)
Access cover
Refrigerant pipe
connecting port
(Liquid side)
Drain pipe
connecting port
Refrigerant pipe
connecting port
(Gas side)
B C
700 650
900 850