Owner's Manual And Installation Manual (Excerpt) - Toshiba ras-m16g3dv-e Service Manual

10. OWNER'S MANUAL and INSTALLATION MANUAL (EXCERPT)

10-1. Installation Diagram of Indoor
OWNER'S MANUAL (EXCERPT)
SIGNAL RECEIVING UNIT DISPLAY
1
1 OPERATION (Green)
2 TIMER (Orange)
3 PRE.DEF (Preheat/Defrost/Self Cleaning) (Orange)
4 TEMPORARY button
2 PREPARATION BEFORE USE
Loading Batteries
1. Remove the slide cover.
2. Insert 2 new batteries (AAA type) following the
(+) and (–) positions.
Clock Setup
1. Push by tip of the pencil.
If timer indication is flashing, go to the next step 2.
2. Press or :
Adjust the time.
3. Press : Set the
time.
Remote Control Reset
Push by tip of the pencil or
1. Remove the batteries.
2. Press .
3. Insert the batteries.
Start/Stop
1. Press to start
operation.
(A receiving beep is heard)
2. Press to stop
operation.
(A receiving beep is heard)
3 REMOTE CONTROL
1 Infrared signal emitter
2 Start/Stop button
3 Mode select button (MODE)
4 Temperature button (TEMP)
5 Fan speed button (FAN)
6 On timer button (ON)
7 Off timer button (OFF)
8 Setup button (SET)
9 Clear button (CLR)
0 Memory and Preset button (PRESET)
! One-Touch button (ONE-TOUCH)
@ High power button (Hi-POWER)
# Economy button (ECO)
$ Quiet button (QUIET)
% Comfort sleep button (COMFORT SLEEP)
^ Set clock button (CLOCK)
& Check button (CHECK)
* Reset button (RESET)
Note:
When pushing the "SWING", "FIX" and
"FILTER" buttons, indoor unit does not operate
and the receiving beep sound also not appear.
4 ONE-TOUCH
Press the "ONE-TOUCH" button for fully automated operation that is customized to the
typical consumer preferences in your region of the world.
The customized settings control temperature, air flow strength and other settings to
provide you alternate contact with "ONE-TOUCH" of the button. If you prefer other
settings you can select from the many other operating functions of your Toshiba unit.
Press : Start the operation.
AUTOMATIC OPERATION
5
To automatically select cooling or heating operation
1. Press : Select A.
2. Press : Set the desired temperature.
3. Press : Select AUTO, LOW , LOW+
HIGH .
6 COOLING / HEATING OPERATION
1. Press : Select Cool
2. Press
: Set the desired temperature.
3. Press : Select AUTO, LOW , LOW+
HIGH .
7 DRY OPERATION
For dehumidification, a moderate cooling performance is controlled automatically.
1. Press : Select Dry
2. Press : Set the desired temperature.
Hi-POWER OPERATION
8
To automatically control room temperature and cooling (or heating) capacity for faster
cooling (or heating) operation. (except in DRY mode)
Press : Start and stop the operation.
9 ECO OPERATION
To automatically control room to save energy (except in DRY mode)
Press : Start and stop the operation.
Note: Cooling operation; the set temperature will increase automatically 1 degree/hour
for 2 hours (maximum 2 degrees increase).
For heating operation the set temperature will decrease.
10 TEMPORARY OPERATION
In case of the misplaced or discharged
remote control
• Pressing the TEMPORARY button,
the unit can start or stop without
using the remote control.
• Operation mode is set on
AUTOMATIC operation, preset
temperature is 24°C and fan
operation is automatic speed.
11 TIMER OPERATION
Set the timer when the air conditioner is operating.
Setting the ON Timer
Press : Set the desired ON
1
timer.
2
Press : Set the timer.
3 Press : Cancel the timer.
Daily timer allows the user to set both the ON & OFF timers and will be activated
on a daily basis.
– 44 –
, MED , MED+
, or Heat .
, MED , MED+
.
TEMPORARY button
Setting the OFF Timer
Press : Set the desired OFF
timer.
Press : Set the timer.
Press : Cancel the timer.
, or
, or