Table of Contents
Advertisement
SERVICE
Don't guess ... seek advice!
Your local authorised Webasto dealer will be
pleased to help. Check first to determine
whether 'call out' charges may be applicable.
Regularly check your Webasto heating system
for the following points:-
•
Corrosion on electrical terminals ... clean
and spray with an inhibitor as necessary
•
Clean running at the exhaust ... if not, call
an authorised Webasto dealer
•
Ensure that the exhaust outlet and
combustion air intake are 'free' and not
blocked or damaged ... repair or replace as
required.
•
Ensure sufficient water is in the header tank
if a tank is used, or check the system
pressure gauge if a the heater is fitted to a
pressurised system. Do not let either type
of system run dry.
•
Periodically check the water specific gravity
and top up as required with a 75% water
25% anti-freeze mix .
•
Run your heating system during the
summer, if only for a few minutes each
month, to check that it is operating
satisfactorily and to avoid 'old' diesel
collecting in the fuel lines. This avoids
acidity which can destroy components.
Every alternate season, it is recommended that
an authorised Webasto dealer tests the heater
system, and if required, any carbon deposits can
be removed from the heat exchanger.
If the heater takes in sea water or water from a
hose whilst cleaning the boat, - seek the advice
of a Webasto dealer immediately.
Webasto Part Number : 4110310A
Issue No: 02 : 10th November 2010
Matthew Millard
Visit www.butlertechnik.com for more technical information and downloads.
In the interests of continued development, we reserve the right to change
specifications without prior notice
www.butlertechnik.com
Marine Comfort
© Webasto Product UK Limited
Hide quick links:
Advertisement
Table of Contents
