Brother E850TKW User Manual page 50

Printing a Tube or Label Using the P-touch Keyboard
Faceplate
Labels of this type can be used to identify various faceplates. Blocks of text are evenly spaced on each label.
One block
 Label Length: 50 mm, 10-999 mm
 # of Blocks: 1, 1-5
 Orientation:
Cable Wrap
Labels of this type can be wrapped around a cable or wire. The text is rotated 90° counterclockwise and
printed.
 UOM (Unit of Measure): Dia(Ø), Length, CAT5/6, CAT6A, COAX, AWG
 Value: Varies depending on the UOM (Unit of Measure) setting
 Repeat: On, Off
Note
When using Flexible ID Tape:
• We recommend using Flexible ID Tape for "Cable Wrap" labels.
• Labels made with Flexible ID Tape are not designed for use as electrical insulation.
• When wrapping labels around cylindrical objects, the diameter (1) of the object should be at least 3 mm.
• The overlapping (2) ends of the label or the label flag should be at least 5 mm.
(Horizontal), (Vertical)
1
Two blocks
2
2
2
2
40