Resetting The P-Touch; Resetting All Settings To The Factory Settings Using The P-Touch Buttons - Brother E850TKW User Manual

18

Resetting the P-touch

You can reset the internal memory of your P-touch to clear all saved label files, or if the P-touch is not
operating correctly.
Resetting All Settings to the Factory Settings Using the
P-touch Buttons
All text, format settings, option settings and stored label files are cleared when you reset the P-touch
(including language and unit settings).
To reset the P-touch, perform the following procedure.
a
Turn the P-touch off.
b
Press and hold the
(Power) indicator lights in orange and the
c
While holding the
 Press two times to reset the customised settings and clear the data except all of the transferred data
from the computer, registered programs, and the contents in the file memory. (The settings that you
can make using the keyboard LCD unit are reset.)
 Press four times to clear all of the transferred data from the computer, registered programs, and the
contents in the file memory.
 Press six times to delete all data and reset the P-touch settings to the factory settings except the Wi-Fi
settings.
d
Release the (Power) button.
(Power) button and the
(Power) button, press the
(Feed and Cut) button for about three seconds until the
(Label) indicator blinks in green.
(Feed and Cut) button as follows:
18
18
18
182