Adjusting The Lcd Settings; Lcd Contrast; Backlight - Brother E850TKW User Manual

Useful Settings

Adjusting the LCD Settings

LCD Contrast

You can change the contrast setting of the LCD to one of five levels (+2, +1, 0, -1, or -2) to make the screen
easier to read. The factory setting is "0".
a
Select [Settings] in the Home screen using the
key.
b
Select [LCD Contrast] using the
c
Set the value using the
Note
• To return to the previous step, press the Esc key.
• Pressing the Space key on the contrast setting screen sets the contrast to the factory setting of "0".

Backlight

You can change the backlight setting either to "On" or "Off".
The display is easier to see with the backlight on. The factory setting is "On".
a
Select [Settings] in the Home screen using the
key.
b
Select [Backlight] using the
c
Select [On] or [Off] using the
Note
• Power can be saved when the backlight is turned off.
• The backlight automatically turns off. Press any key to turn the backlight on again.
During printing, the backlight is turned off. The backlight turns on during data transmissions.
or key, and then press the OK or Enter key.
or key, and then press the OK or Enter key.
or key, and then press the OK or Enter key.
or key, and then press the OK or Enter key.
, , or key, and then press the OK or Enter
, , or key, and then press the OK or Enter
20
20
20
20
192