Download  Print this page
   

Advertisement

Quick Setup Guide
Thank you for purchasing the P-touch model E800T.
Your new E800T is an intuitive, easy to operate and feature-rich labeller that
produces professionally looking, high-quality labels.
This manual contains basic procedures for using the P-touch. Read the whole
guide before using your product and keep it for later reference.
The available options and supplies may vary depending on the country.
Available Manuals
Visit the Brother Solutions Center at support.brother.com and click Manuals
on your model page to download the latest manuals.
Product Safety Guide
This guide provides safety information; read it before you use the P-touch.
Quick Setup Guide (this guide)
This guide provides basic information about using the P-touch along with
detailed troubleshooting tips.
User's Guide
This guide provides additional information about the P-touch settings and
operations, troubleshooting tips, and maintenance instructions. This guide is
on the included CD-ROM.
Unpacking Your P-touch
Before using your P-touch, check that the package contains the following:
P-touch
Product Safety Guide
CD-ROM
USB cable
Printed in China
D00K43001
E800T
English
Quick Setup Guide
AC adapter
Power supply cord
Tape cassette
Ribbon cassette
General Description
Front
1
2
Back
4
1
Tube exit slot
2
Handle
3
Cover open button
4
Tube insert slot
5
Top cover
6
Tape exit slot
7
(Tube) indicator
Inside
4
3
2
5
6
7
8
1
Tube release lever
2
Tube half-cut adjuster
3
Tube cutter board
4
Tube cutter
5
Tube exit slot
6
Platen roller
7
Print head (for tube)
8
Ribbon cassette compartment
(for tube)
IMPORTANT
Before using the P-touch, make sure you remove the protective material
according to the following procedure.
1 Press the cover open button to
open the top cover.
2 Pull the tape to remove the
tape together with the
protective material.
4
5
6
3
13
12
8
(Label) indicator
9
(Battery) indicator
10
(Power) button
11
(Feed and Cut) button
12 USB port
13 AC adapter socket
1
10
12
13
14
9
9
Tape exit slot
10 Tube cleaner
11 Tube insert slot
12 Tape cassette compartment
13 Print head (for tape)
14 Tape cutter unit
7
8
9
10
11
11

Advertisement

   Also See for Brother P-touch E800T

   Summary of Contents for Brother P-touch E800T

  • Page 1 The available options and supplies may vary depending on the country. Available Manuals Visit the Brother Solutions Center at support.brother.com and click Manuals on your model page to download the latest manuals. Product Safety Guide This guide provides safety information;...
  • Page 2 Charging the Rechargeable Li-ion Battery Connecting the Power Supply NOTE • Before use, fully charge the battery. AC Adapter • Up to three hours may be needed to fully charge the battery. Use the AD9100ESA (AC adapter) for this P-touch. Connect the AC adapter directly to the P-touch.
  • Page 3 Inserting a Tube Inserting a Tape Cassette The TZe tape, FLe label, and HSe tube cassettes can be used in your Open the top cover. P-touch. IMPORTANT If the new tape cassette has a cardboard stopper, be sure to remove the stopper before inserting the cassette.
  • Page 4 Turning Power On/Off Condition (Tube) (Label) (Power) (Off) Cutter error (Tube) On: Press the (Power) button to turn the P-touch on. The (Power) indicator lights in green. Off: Press and hold the (Power) button again to turn the P-touch off. The No tube error (Tube) (Off) (Power) indicator may light in orange until the power is off.
  • Page 5: Operating Environment

    NOTE • Brother TR ribbon cassette (12 mm width) Make sure you are logged on with administrator rights. Interface The latest software and manuals can be downloaded from the Brother Solutions Center at support.brother.com. Version 2.0 Full Speed Environment Click the [commoninstaller.exe] button.
  • Page 6: Cable Wrap

    For Windows Vista / Windows From the Start button, click [All Programs] - [Brother P-touch] - [Cable Label Tool 1.0] or [P-touch Editor 5.1], or double-click the [Cable Label Tool 1.0] or [P-touch Editor 5.1] shortcut icon on the desktop.
  • Page 7: Printing Problems

    Punch-Down Block Troubleshooting Labels of this type can be used to identify a type of electrical connection often used in telephony. You can enter up to eight lines for each block on a single label. Printing Problems Problem Solution The label or tube is not •...
  • Page 8 P-touch. following procedure: is released. Use 24 mm or 36 mm tape. A tape or tube jam error Contact Brother customer service. Turn the P-touch on. cannot be cleared despite Press and hold the (Feed and Cut) following the button for more than 10 seconds to print the troubleshooting steps.

Comments to this Manuals

Symbols: 0
Latest comments: