Using Transferred Database Data - Brother E850TKW User Manual

Using the Data Transferred to the P-touch

Using Transferred Database Data

You can transfer a database converted to a *.csv file to the P-touch.
The data for a database that was transferred without a template can be imported into each label except
auto format layouts and transferred templates. The database data is imported according to the number of
blocks and pages set for each label.
Important
• Before using a database, transfer the database to the P-touch.
• If a database and template are linked and transferred together, the database can use only that template.
Note
• If the selected database range is larger than the set number of blocks and pages, the data will be imported
until the maximum number of blocks and pages is reached.
• If the set number of blocks and pages is larger than the selected database range, the operation will finish
when decreases database is imported. The remaining blocks and pages will not be printed.
a
Press the Insert key, select [Database] using the
b
Select the database you want using the
The first record of the selected database appears.
Note
• If the selected record is not changed within a certain time while the database is displayed, the contents of
the record will be displayed at the bottom of the screen. However, the contents of the record will not be
displayed if the record contains 11 one-byte characters or fewer.
• When the Preview key is pressed, the properties of the record appear.
• When setting the range, the "field names" line (first line of data) cannot be selected.
or key, and then press the OK or Enter key.
or key, and then press the OK or Enter key.
3
3
67