Before Operating - Sharp R-350A Operation Manual

Before Operating

* This oven is preset with the INFORMATION GUIDE ON.
To assist you in programming your oven, the information guide will appear in the display.
In this manual, the display of information guide is abbreviated.
* You can get information guide in Russian or English.
To change the language, see page E-16.
* When you become familiar with your oven, the information guide can be turned off. Check page E-15.
Getting Started
Step
Procedure
Plug the oven into a power point and
1
switch on the power.
Open the door. The oven lamp comes on.
2
Close the oven door.
Press the STOP/CLEAR pad so that the
3
oven beeps.
Clock Setting
This is a 12 hour clock.
* To enter the present time of day 11:34 (AM or PM).
Step
Procedure
Press the CLOCK pad.
1
Enter the correct time of day by press-
ing the numbers in sequence.
2
Press the CLOCK pad again.
3
If you wish to know the time of day during the cooking or timer mode, press the CLOCK pad. As long as
your finger is pressing the CLOCK pad, the time of day will be displayed.
If you attempt to enter an incorrect time (Ex. 13 : 45),
Press the STOP/CLEAR pad and re-enter the time of day (Ex. 1 : 45).
Stop/Clear
Use the STOP/CLEAR pad to:
1. Stop the oven temporarily during cooking.
2. Clear if you make a mistake during programming.
To Cancel a Programme During Cooking
Press the STOP/CLEAR pad twice.
Pad Order
Pad Order
1 1 3 4
will appear in the display.
E – 5
Display
as above
Only the dots will remain.
Display
(operation guide off:
)
The dots (:) will flash on
and off.