Page 3
“CE” logo here somewhere… Getting Started 1. After removing scale from carton, assemble the sub-platform to the scale using the four screws and hex wrench provided. Once the sub-platform is secure, place the stainless steel cover on top of the spider. 2.
Page 4
Numeric & Function Keys Description 0 – 9 Enters numeric data when prompted; usually a ZIP code or country code Selects UPS Ground commercial UPS Ground Com (1) UPS Ground Selects UPS Ground residential Res (2) Selects UPS Next Day Air. After a valid ZIP code is entered, use this key to tog- UPS Next Day gle thru commercial/residential package and commercial/residential letter Allows you to enter a new three digit ZIP code...
Page 5
Rating Keys Description - Priority Selects First Class or Priority Mail. The scale automatically switches to Priority Mail for items weighing more than the First Class weight limit Selects domestic Parcel Post. The scale automatically determines if the rate Parcel Post should be Inter-BMC/ASF or Intra-BMC/ASF Selects Registered Mail CERT...
Page 6
Scale Operation When the scale is first switched on, it will dis- play some information and then default to weighing mode. In weighing mode, the scale will display pounds and ounces. NOTE: If your item weighs less than one pound, the pounds display will be blank.
Page 7
How to obtain the rate for an international letter or package: 1. Place the item on the center of the scale’s platter and allow the reading to stabilize. If the class of mail you have selected re- quires a destination ZIP code, the scale will automatically prompt you.
Page 9
The scale goes back to automatic mode with First Class Letter rates enabled. Calibration Your SPS-30 PLUS postal scale is ready to use right out of the box. There is no need to calibrate the scale unless you feel that the scale has become inaccurate. It is a good idea to check the calibration of your scale from time to time with a precision test weight.
Page 10
Calibration - Continued 6. Press the ENTER (Yes) key to save the 4 lb calibration value. The SPS-30 Plus scale displays the message “C 30 “. 7. Place the 30 lb test weight(s) onto the scale’s platter. When the weight stabilizes, the scale displays the message “...
Page 11
Postal Rate Chip Change Instructions NOTE: Turn the scale’s power switch to the OFF position prior to beginning The SPS-30 PLUS postal rate information is contained in a pre-programmed memory device that is mounted on a rate chip which plugs into the scale.
Page 12
Or simply call the number below. Limited 12 month Warranty This product is warranted by Transcell Technology against manufacturing defects in material and workmanship under normal use for twelve (12) months from the date of purchase. For com- plete warranty details and service information, please contact us at the address below.