Storage; Maintenance - Stamina EX 30 Owner's Manual

STORAGE

1. To store the EX 3.0 simply keep it in a clean dry place.
2. The assembled dimensions of EX 3.0 are approximately 59" long x 32 3/4" wide x 59 3/8" tall. Please
measure your EX 3.0 if exact dimensions are needed.
3. The EX 3.0 has a pair of WHEELS(81) built into the FRONT BASE(2) at the front. Grasp the HANDRAILS
and the shaft of the PIVOTING ARMS to lift and move the EX 3.0. Two people are required.

MAINTENANCE

The safety and integrity designed into the EX 3.0 can only be maintained when the EX 3.0 is regularly
examined for damage and wear. Special attention should be given to the following:
1.
Use the "ENTER" and "
Magnetic System increases and decreases workout intensity. The Magnetic System will provide many
years of use.
2.
Verify that the Warning Label is in place and easy to read. Call Stamina Products immediately
(1-800-375-7520) for a replacement Warning Label if the Warning Label is missing or damaged.
3.
It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
4.
Verify that all nuts and bolts are present and properly tightened. Replace any missing nuts and bolts.
Tighten any loose nuts and bolts.
5.
Replace worn or damaged components immediately and discontinue using the EX 3.0 until the repair is
made.
6.
Only Stamina Products supplied components shall be used to maintain/repair the EX 3.0.
7.
Keep your EX 3.0 clean by wiping with an absorbent cloth after use.
/ " buttons on the COMPUTER(25) to select a program and verify that the
23